Venture Pour Premium Polyester Resin 55 Gallon Drum, Low Viscosity Coating for Laminating Fiberglass mat, Biaxial &Cloth for ext/Interior of Boats, Canoe, RV, Car, Truck, Trailer, Surfboards; Hard NONTACKY Finish

• 📦 Shipping: Contact us directly for shipping inquiries, if your address does not work with our existing freight schedules.

• ✅ What you get: 55 Gallon Drum of Venture Pour Polyester DCPD Resin
• MEKP will need to be ordered separately
• ✅ PREMIUM / HIGH GRADE - LXC V.P. POLYESTER RESIN is a Premium Fiberglass Laminating Resin is the highest grade you will find - a premium product used in the marine industry and by manufacturers and boat yards that seek quality and due to its fast cure to a tack-free finish it allows to you to proceed to the next steps in your repairs or projects much faster. No waiting for a week to get to the tack free finish. While being a laminating resin it is also a FINISHING RESIN as it cures tack-free without the need for wax. Venture Pour DOES NOT CONTAIN WAX.
• ✅ CURES FAST - Use this resin on Wood, Fiberglass, or Metal without any hassle. Depending on temperature and humidity, it can reach its cured state in as quick as 4 hours but may take up to 24-48 hours, must be fully mixed. factors like temperature being lower than 72°F will extend the time it takes to cure.
• ✅ DRIES TACK-FREE - Manufactured in the USA, this DCPD/Ortho-type resin dries tack free without the need for wax.
• ✅ HIGH COMPATIBILITY - Compatible with all types of Fiberglass and coring materials, this polyester laminating resin is perfect for high quality repairs, new construction parts, and vertical surfaces, also can be used for below the waterline applications.
• ✅ Mixing - Please follow the Mix Ratio Chart on the product label, this can also be found in the product photos on this page. Resin must me mixed before use and after adding MEKP, mix completely by also scraping the bottom and sides of your mixing cup. Incomplete mixes will result in curing issues. 
• ✅ Temperature and Heating - If Temperatures are lower than 72°F it is recommended to add heat to the work area. Be sure to use NON-Sparking or NO-Flame type heating devices to ensure a safe environment. If the curing process is taking longer than expected adding heat will help, considerably. Do not apply resin to surfaces with temperatures lower than 72°F, warm the surfaces before applying any type of resin.
• ✅ MULTIPLE APPLICATIONS - This polyester fiberglass resin is great for the following applications: marine (above and below waterline), general purpose laminating, aero space, FRP (Fiber Reinforced Plastic) parts, auto body, transportation, wood, and much more. Superior adhesion to epoxies and other polyester resins.
• 🏢 Business pricing available, contact us of for details

Important Mixing & Application Guidelines:

• Mix Thoroughly: Always scrape the sides and bottom of your container to ensure the resin and catalyst are 100% combined. Unmixed portions will leave uncured spots on your project. Use a smooth-sided container and avoid using drill mixing bits.
• Work in Small Batches: Mix only what you can easily apply within 7 minutes. Start with a 1-pint batch to gauge your working time. Do not mix more than 1 to 2 quarts at once, as larger batches generate excess heat and cure prematurely.
• Rough it up: sand or grind the surface to create clean and rough surface with a "tooth" for the resin to grab onto (a mechanical bond).
• Clean it off: Before applying the resin, the surface must be completely wiped down with a solvent like acetone to remove dust, wax, and grease. The surface must be 100% dry before the resin touches it.
• Summer Weather Adjustments: During hot summer months, consider reducing your catalyst ratio to 0.75% to extend your working time before the resin gels.
• The Danger of "Hot Batches" (Over-Catalyzing): Adding too much catalyst causes an aggressive exothermic reaction. The resin can smoke, crack, warp the project, or even catch fire in the mixing cup.
• Manage Sunlight: Avoid applying the resin in direct sunlight, which drastically accelerates the cure time. If it is over 75°F, work in the shade. Once the application is complete, you can move your project into the sun to help speed up the final curing process.
• Moisture: Applying resin to damp wood or working in extremely high humidity/rainy conditions can inhibit the cure, causing the resin to stay cloudy or tacky. Everything must be bone dry.
• Clean-Up Requires Acetone: be sure to routinely clean your tools, brushes and so on with acetone as it will dissolve the resin. Mineral Spirits and other cleaners are not effective.
• Proper storage to maximize shelf life: store the resin and the MEKP catalyst in a cool, dark, and dry climate-controlled environment. Leaving it in a hot garage or freezing shed will ruin the product.
• Coverage Estimate: As a general rule, 1 gallon of resin will wet out approximately 40–50 square feet of 1.5 oz chopped strand mat, or roughly 4 square yards of standard fiberglass cloth, depending on application thickness and technique.
• Proper Safety Gear (PPE) is Non-Negotiable: 
  • Ventilation & Respirators: always work in a well-ventilated area and it is strongly recommend a respirator fitted with organic vapor cartridges be used.
  • Gloves: Gloves must be used, heavy duty gloves are encouraged. Nitrile gloves are okay, but latex tends to be better. The chemicals in polyester resin can break down cheaper nitrile, leaving hands exposed and sticky.
  • If exposed skin comes in contact with resin, catalyst or both. clean affected area immediately. Be very cautious in use of acetone anywhere on or near your body. Use soap and water and clean vigorously and thoroughly.